Set flexalite fans plug and play
Posted: Monday 31 July 2017 12:05
Wat: Set gebruikte flexalite fans. Nog geen 10.000km mee gereden.
Hoeveel: 125 euro (nieuw over de 300 euro!)
Waar: Vroomshoop city
Je sluit ze aan op de standaard AUX fan aansluiting op de MK3 supra en dan is het plug and play. Op de foto is de set nog gemonteerd op een stock MK3 radiator (not included) maar het past ook op een upgraded rad. Past ook op MK4 supra radiators, alleen is de MK4 rad net iets groter.
Weg met die zware stock viscose fan!
Titan motorsports over deze set:
This is the same kit that can be found on many record setting Supras. It will fit almost any car as long as the sizing is correct to the radiator size. Improve your performance and the looks of your engine bay with this simple to install kit.
This Flex-A-lite electric fan uses a thin pancake style motor to fit in only 2 1/4 in. of space, allowing easy installation in any car. The dual fan is rated at 2,500 cfm and features a lightweight one piece plastic shroud and rigid brackets to ensure a strong installation. Full contact rubber seals prevent unwanted air leakage. Allows you to remove factory belt driven fan systems and free up a few horsepower from drag.
Hoeveel: 125 euro (nieuw over de 300 euro!)
Waar: Vroomshoop city
Je sluit ze aan op de standaard AUX fan aansluiting op de MK3 supra en dan is het plug and play. Op de foto is de set nog gemonteerd op een stock MK3 radiator (not included) maar het past ook op een upgraded rad. Past ook op MK4 supra radiators, alleen is de MK4 rad net iets groter.
Weg met die zware stock viscose fan!
Titan motorsports over deze set:
This is the same kit that can be found on many record setting Supras. It will fit almost any car as long as the sizing is correct to the radiator size. Improve your performance and the looks of your engine bay with this simple to install kit.
This Flex-A-lite electric fan uses a thin pancake style motor to fit in only 2 1/4 in. of space, allowing easy installation in any car. The dual fan is rated at 2,500 cfm and features a lightweight one piece plastic shroud and rigid brackets to ensure a strong installation. Full contact rubber seals prevent unwanted air leakage. Allows you to remove factory belt driven fan systems and free up a few horsepower from drag.
